Shutter picture frame is the typical support structure for homes and buildings as well as a variety of closed structures. Wood framing creates an interior wood faucet to allow open internal spaces and attach outer coatings.
12 Photos Gallery of: Building Wood Shutter Picture Frame
Measure timber that will be the main support bar for your structure. This can be anything from a large 6-of-6 post for a home. Building design to as small as a 2-for-2 bit number for something like a cabinet or furniture. Support beams will be both corner posts and even cross beams to support the remaining shutter picture frame and overlay of the structure. Typically the structure will be a square construction with heavier corner posts and smaller cross beams.
Cut cross beams to span the length of the structure between your cross posts. These should bridge the gap between the posts and provide a structure for attaching the studs span the gaps in the construction. For example, a regular square shutter picture frame construction will have 4 wood extra posts in the corners. Cross beams bridge the distance between the sides and end on the top of the beams, and screw in place. Screw or nail studs or supports along open areas in a large frame that will be covered by other materials. For example, the wall of a home that will have plaster attached.