Indoor shutters awnings make an interesting and fun addition to the kitchen, children’s bedroom shutters and all shutters where an outdoor feel is desired. The construction of an awning is quite simple. A curtain rod is placed near the wall and a second curtain rod of the same length is placed at least 12 inches away from the wall. The other rod is mounted lower and a faux awning stretched from the first rod across the other rod. This creates the impression of an awning.
12 Photos Gallery of: Creating Indoor Shutters
Measure the width of the indoor shutters from the outside of shutters lining. Add 8 inches. Cut two pieces of clothing bar to this measurement. You will use these to support the awning. Action 2 inches above the shutters trims and marks a 4-inch horizontal line from the edge of the trim outward on each side. Measure from trim edge 2 inches along this line and mark it. Repeat this on both sides. Place your curtain rod fastens in your places and screws the fasteners into the wall. Use wall anchor if you do not hit a stud.
Action 12 inches down from the bottom of each console and 2 inches away from the edge of the trim and mark this. Fit your garment bracket so that the top of the bracket is also with your indoor shutters. Screw your rack on the wall. If you do not hit a pin, use a wall anchor for extra support. Measure the width of the rack between the brackets. Add 1 inch for fabric width measurement. Measure the circumference of the rack plus one inch. Measure the distance from the top bar to the bottom bar. Add double circumference to double spacing. This is your length measurement. Cut the fabric.