Making Wooden Window Shutters Interior
Wooden window shutters interior look both decorative and rustic; they and can turn a regular looking window into one that starts the whole room. Even if you can pay a professional craftsman to install wood windows, your budget may not allow you to hire a professional. An alternative is to make your own wooden window using some basic tools and supplies purchased cheaply from any hardware store or home improvement store. This approach allows you to enjoy wood thresholds without spending a fortune to do this.
12 Photos Gallery of: Making Wooden Window Shutters Interior
Measure the width and length of the existing wooden window shutters interior using a tape measure. Cut a plank using a circular saw to measure the same dimensions as windows. Sand plank by means of grit sandpaper to remove any irregularities and to make the wood smooth at touch, including edges and corners. Sand surface windows use medium grit sandpaper to make sure the threshold is still. Nail plank in place with 4-inch nail. Cover the nail holes with wood dense, and then allow drying for six hours.
Apply a smooth layer of scratch on the shelf using a sponge brush. Allow the stain to dry for 2-4 hours. Apply a smooth layer of polyurethane lacquer on the wooden window shutters interior using a brush. Allow the paint to dry for 4-6 hours. Press a line of wood sealed along all the seams of wood paneling, and then drives your finger along the seams to smooth the seal and create a tight seal. Allow caulk to dry for six hours.