Outside Mount Shutters Ideas
Outside mount shutters – Lift the far left panel to the end frame. This panel has hinges on both sides. Raise the hinges on the left side with the hinges in the frame. Press a pin through the top hinge and other pins down through the lower hinge. Open the enclosed shutter towards the room. Raise the hinges on the left side of my left panel with the hinges on the right side of the attached panel. Put a hinge pin through each hinge.
Move to the right side of the end frame. Raise the hinges on the right panel with the hinges in the frame and install the pins. Open the panel facing the room and install between the right panel. Open outside mount shutters into the room. Secure the frame in place with the rest of the supplied screws. A screw should be inserted into each pre-drilled screw hole. Slide the supplied screw cover over each screw head. Use a hammer to gently tuck the cover in place.
12 Photos Gallery of: Outside Mount Shutters Ideas
Open the right panels to form a V. Place a level on top of V. Move my right panel up or down until it is level with the far right panel. Tighten the screws that hold the hinge plates in place with the drill. Insert the supplied fixing screw into the hole in the center of each hinge. Repeat this step on the left side. Run a rigid silicone seal along the seam where the outside mount shutters meets the window opening. Gently rub your finger along the string of dense to level it.