Tips To Install Shutter TV Wall Cabinet
Shutter TV wall cabinet – There is no hard and fast rule that says you must use wall cabinets for the upper cupboards and the cabinet for the cabinet. It’s just a common configuration for regular kitchens. But there are plenty of wall cabinet applications for use as a cabinet. Be sure to use them for windows places according to a sunny window wall. Maybe try feeding a thin hall with thin wall cabinet. If you do not need the counter space, fill a whole wall of wall cabinet, or use a thin countertop instead of 32-inch deep cabinet.
Instructions
12 Photos Gallery of: Tips To Install Shutter TV Wall Cabinet
Place your cabinets on the floor where you want to install them. Make a button-like contour on the wall and along the floor with a pen. Take the shutter TV wall cabinet and then find the rules in the wall. You can use a control detector if you have one or just a long thin nail that you pint for a few inches until you find the rules. Mark the rules with the pen.
Place a 2×4 flat on the floor the same width in your shutter TV wall cabinet along the leading edge, but back about 1/4 of an inch. Place a flat on the floor as well as the wall in which the back of the cabinet will sit. This will lift the cabinet from the floor a little. Screw both of them into place with a wooden screw. Lower the screws into the wood so that they are level and not stand up. Position the cabinet on the 2×4 base. Mark the inside of the cupboards where the studs are found earlier. Drill a test hole through the cabinet and then screw a wooden screw into the hole.