Window security shutters are the small rectangular windows placed directly above the larger windows and doors. They are also often used in basements and basements. You can hang the blinds on the transom windows as you do any other window. Because these windows are small, you need to use a little dark to ensure a proper fit. Select a blind that fits the width of the transom window opening. It is a matter of personal preference if your blind is long enough to reach the bottom of the window below the transom or just long enough to cover only the transom window.
12 Photos Gallery of: Window Security Shutters Ideas
Measure an inch from the top edge of the window security shutters on both sides of the transom window frame. Mark the measurement on the casing on board with a pencil. Position one blind window mount on each pencil marker. The outer edge of the blind window should be a quarter inch in from the ends of the upper window casing on board. Use a screwdriver to drive the screws included in the blind window through the holes in the blind attachment window in the upper window casing window. This will secure the brackets in place.
Slide the window security shutters into the brackets so that the ends fit into place within the brackets. Slide the blind window to cover the grooves on the front of the brackets; this will keep the window blind mounting in place. Lower the window blind to the desired length, and pull the cord aside to lock it up. Blinds are adjustable, and you can open or close them by rotating the bar.